The Working Principle Of The Floor Heating Water Separator

Radiant floor heating is an advanced heating method. Its working principle is to feed circulating hot water into the heating pipe loop under the laid floor or floor tiles or directly lay heating cables to heat the floor. The heat passes through a large area of the ground and mainly radiates to the space above the floor in a gentle and warm manner. Distributed evenly, so that the human body can feel the dual heat effect of heat radiation and air temperature. Generally speaking, the floor heating system is divided into three parts:
1. Heating system (large boiler self-heating for central heating, wall-hung boiler, gas furnace, electric control infrared equipment, etc.)
2. Control system (divided water collector, multi-functional filter, return water stop valve, mixed water pump, circulation pump, etc.)
3. Heat exchange system (including insulation board, radiation paper and fixed steel mesh, etc.).
The floor heating water separator is the control center of the entire indoor geothermal heating. It has the function of dividing flow and pressure. When the heat medium flows into the room, it enters the main bar of the water separator after passing through the multi-functional filter. In this link, the filter filters out heat. Impurities in the medium are used to prevent impurities from entering the underground pipe network and blocking the pipeline. The main bar is installed horizontally, so that the same height and equal pressure are used to distribute the heat medium evenly to the branch pipes. After passing through the heat exchange system, each branch pipe flows back to the water collection back to the main bar, and then flows into the water from the return port. in the heating system. In addition, a water mixing device is added to the self-heating system, that is to say, after heat exchange, the temperature of the heat medium (water) is still very high. It also saves energy.