1. Classification by purpose of use
● Comfort air conditioning - requires suitable temperature and comfortable environment, no strict requirements for the adjustment accuracy of temperature and humidity, used in housing, offices, theaters, shopping malls, gymnasiums, cars, ships, airplanes, etc.
● Process air conditioning - requires certain adjustment accuracy for temperature and humidity, and also has higher requirements for air cleanliness. Used in electronic device production workshops, precision instrument production workshops, computer rooms, biological laboratories, etc.
2. Classification by equipment layout
● Central air conditioning - air handling equipment is concentrated in the central air conditioning room, and the treated air is sent to the air conditioning system of each room through the air duct. It is suitable for places with large area, concentrated rooms, and relatively close heat and humidity loads in each room, such as shopping malls, supermarkets, restaurants, ships, factories, etc. The system is easy to maintain and manage, and the noise and vibration isolation of the equipment are relatively easy to solve, but the energy consumption of fans and water pumps in the distribution system of the centralized air conditioning system is relatively high.
● Semi-centralized air conditioning - an air conditioning system with both central air conditioning and terminal devices for air processing. This system is relatively complex and can achieve higher adjustment accuracy. Applicable to civil buildings with independent regulation requirements such as hotels, hotels, and office buildings. The energy consumption of the transmission and distribution system of semi-centralized air conditioning is usually lower than that of centralized air conditioning systems. Common semi-centralized air conditioning systems include fan coil systems and induction air conditioning systems.
● Local air conditioning - each room has its own equipment to handle air. The air conditioner can be installed directly in the room or in an adjacent room to handle air on the spot. It is suitable for occasions with small areas, scattered rooms, and large differences in heat and humidity loads, such as offices, computer rooms, and homes. Its equipment can be a single independent air conditioning unit or a system composed of fan coil air conditioners that centrally supply hot and cold water through pipes. Each room adjusts the temperature of the room as needed.
3. Classification according to the load medium
● Full air system - only hot and cold air is delivered to the air conditioning area through air ducts. The types of air ducts in the full air system are: single-zone air ducts, multi-zone air ducts, single or double ducts, terminal reheat air ducts, fixed air flow, variable air flow systems, and mixed systems. In a typical all-air system, fresh air and return air are mixed and processed through the refrigerant coil before being sent indoors to heat or cool the room.
● All-water system - the room load is borne by the centrally supplied cold and hot water. The chilled water produced by the central unit is circulated to the coil in the air handling unit to adjust the indoor air. Heating is achieved by circulating hot water in the coil. When the environment only requires cooling or heating, or heating and cooling are not performed at the same time, a two-pipe system can be used. The hot water required for heating is produced by an electric heater or boiler, and heat is dissipated by convection heat exchangers, kick plate heat radiators, fin tube radiators, standard fan coils, etc.
● Air-water system - the load of the air-conditioned room is partially borne by the centrally processed air, and the other load is carried by water as a medium into the air-conditioned room to reprocess the air. The air-water system includes the terminal reheat system, the fresh air + fan coil system, and the induction system with coils.
● Direct evaporative unit system - also known as refrigerant air conditioning system, the load of the air-conditioned room is directly borne by the refrigerant, and the evaporator (or condenser) of the refrigeration system directly absorbs (or releases) heat from the air-conditioned room. Its unit consists of: air handling equipment (air cooler, air heater, humidifier, filter, etc.), ventilator and refrigeration equipment (refrigeration compressor, throttling mechanism, etc.).






